Bottle pacifier cleaning and disinfection

New supplies such as new baby bottles and new pacifiers must be cleaned and disinfected before initial use to prevent contamination during production and transportation.

Wash and disinfect before each use.

Immediately after each use, soak it in warm water, you can use a bottle cleaning agent.

Remove the bottle cap and pacifier, and use a special bottle pacifier cleaning brush to properly clean it, including the rotating part in the bottle cap.

The front part of the pacifier is relatively fragile. Do not pull it hard during the cleaning process. The resulting crack may cause leakage.

It should be noted that when cleaning the bottle, please do not use cleaning tools containing abrasive or metal materials to avoid wearing the bottle.

Boiling disinfection

1. Prepare a cooking pot. This pot is dedicated to sterilizing baby bottles and pacifiers. It should not be used for other cooking purposes.

2. Add cold water to the pot, the depth of the water should be able to immerse the baby bottle, and ignite.

3. After boiling, put into the cleaned milk bottle, pacifier, bottle cap, bottle cap, and cook for another 3-5 minutes.

4. Make sure the parts are immersed in water and do not touch the wall of the pot to avoid deformation or damage.

5. Excessive boiling will affect component life.

Microwave disinfection

1. Use a special microwave oven to sterilize the container.

2. Do not put product parts such as pacifiers and bottle caps in the microwave oven to avoid deformation and damage.

3. Disinfection method Please follow the usage method of microwave disinfection container.

4. Please refer to the instruction manual of the microwave oven for operation.

Keep water in the container when heating

Steam disinfection

1. When using an electronic steam sterilizer, please follow the product instructions.

2. After cleaning the baby bottle, pacifier, bottle cap, etc., put it in the steam pot and press the switch to sterilize.

3. After disinfection, the power will be cut off automatically, and it will be taken out when it is used next time.

4. There are two types of steam sterilizers on the market, one without drying function and the other with drying function. It is recommended to choose one with a drying function to avoid the bacteria not being easily dried after the disinfection.

In the above three modes, the temperature of the freshly sterilized product is high. Please take care to avoid burns when handling. Do not use liquid medicine for disinfection.

UV disinfection

1. When using an ultraviolet sterilizer / sterilizer, please follow the instructions of the product.

2. After cleaning the baby bottle, pacifier, bottle cap, etc., put it in the UV disinfection pot / disinfection cabinet and press the switch to disinfect.

3. After disinfection, the power will be cut off automatically, and it will be taken out when it is used next time.

Finally, it should be reminded that, after disinfecting the milk bottle and pacifier, do not touch it with dirty hands; if the bottle is not used after disinfection for 24 hours, you need to re-sterilize to prevent bacteria from breeding.